520-02a-2_capsules_150x150

Sorbent Capsule, 520 Inorg Mercury Samplers, 10pcs

Varenr. SK52002A

SORBENT CAPSULE FOR 520 SERIES INORGANIC MERCURY SAMPLERS, 10 PCS

Beskrivelse
  • High capacity
  • Extensively field tested
  • Validation based on OSHA Method ID-140
  • Specified in Health and Safety Executive (UK) Method MDHS 16/2
  • Meets NIOSH and OSHA standards
  • Lowest cost per measurement available
  • Reusable capsule holder
  • Replaceable sorbent capsule
  • Easy-to-use
  • Attach to a workers collar or pocket
  • No pump needed
  • Lightweight
  • Weighs 0.5 ounce
  • Long-term sampling up to 120 hours
  • High accuracy and sensitivity
  • Positive analysis of elemental mercury
  • Limit of detection: 0.01 µg*
  • Limit of quantitation: 0.04 µg*
  • Sampling and experimental error: ± 8.6%
  • Removable sorbent capsule eliminates false high readings
    due to contamination of badge housing
  • Background: 0.02 µg/200 mg section
  • Limits may vary with analysis and instrumentation.
    For sampling low levels of mercury, use a sorbent tube.
  • No moisture or chlorine interferences
  • Extensive field testing and chamber studies show accuracy without interference from either moisture or chlorine
  • Simple analysis
  • Uses standard laboratory equipment and analytical methods
Specifikationer
Varenr. SK52002A
Antal / pk 10
Enhed stk
Min. bestilling 1
Leverandørens varenummer 520-02A
Type Gas/Dampe
Type 2 Tilbehør