Login
Search
Mobile Menu black
High flows from 5 to 15 L/min Achieve flow rates that you couldn't reach before when using a personal sample pump. The Leland Legacy provides the high flows and long run times of a vacuum-style pump in a compact, portable, and battery-operated sampler.
Long runs for 24 hours on one battery charge Rechargeable lithium-ion (Li-Ion) battery pack provides 24-hour run times with impactors and other sampling devices with low back pressures.* Leland Legacy is ideal for 24-hour indoor air studies and unattended ambient air sampling.
Typical Run Time
24+ hours:
Results obtained using a new pump and new fully charged battery. Pump performance may vary. Back pressure on PTFE filters can vary within the same lot. Maximum operating temperature is 464 F (240 C) based on support ring. Pump sampling at 10 L/min using PEM impactor with 37-mm, 2.0 µm PTFE filter with new pumps and batteries. Pump and battery performance may vary. See additional run times in Performance Profile.
Low Levels Longer runs at higher flows provide more sample for the enhanced sensitivity required for measuring low concentrations, particularly in indoor air environments.
Low Noise With the noise-reducing case accessory, the Leland Legacy can operate at 10 L/min and 12 inches water back pressure with a noise level of only 52 dBA.**
** Measured 3 feet (1 meter) from pump operating at 10 L/min without media
Advanced flow control The patented (U.S. Patent Nos. 5,892,160) internal flow sensor measures flow directly and acts as a secondary standard to constantly maintain the set flow. Set flow is achieved immediately at start-up and flow calibration is automatically maintained by built-in sensors that compensate for differences in temperature and atmospheric pressure during sampling.
Flexible programming