ismatec-ismatec-ipc-low-speed-planetary-gear-driven-digital-peristaltic-pumps-4794

IPC slangepumpe IPC 12, 12 kanaler, 8 ruller

Varenr. ISMISM932

IPC Planetary Drive slangepumpe IPC 12, 12 kanaler, 8 ruller

Beskrivelse

Fewer tubing changes!

Planetary drive for less pulsation and longer tubing life
Smooth rotation and accurate liquid flow provided by eight SS rotors
Easy repeatability with four-digit LED
Simple to use—automatic occlusion cartridges provide reproducible results
Control via keypad, computer, or remote control

These multichannel programmable pumps feature planetary gears that drive eight stainless steel rollers in unison for smooth rotation and accurate liquid flow. The four-digit LED display shows flow rate or rpm when pump is running. Use the MAX button to instantly increase speed for priming or flushing without disturbing your programmed settings.

Combine tubing sizes and formulations to suit your application. Clickngo cartridges feature automatic occlusion for simplified use, fewer tubing changes, and reproducible results. Adjustable occulsion cartridges are available separately. Install cartridges in one direction for low pulsation; in opposite direction for higher counter pressure.

Order the two-stop tubing size and formulation to suit your application needs (sold separately). More than 100 options exist—the most popular sizes and formulations can be found under Accessories below!

Ideal for continuous pumping or for dispensing in any of five modes:

  • Flow rate: 0.0004 to 44 mL/min (depending on tubing size used and model used)
  • By time: 0.1 seconds to 999.9 hours
  • Batches: set delay between dispensed volumes
  • Drip-free: program back-steps to prevent drips
  • Volume displays in mL or µL

Pumps feature analog input and output controls, as well as an RS-232 interface for control by a computer.

Remote control capabilities: RS-232 to control all operating functions (DB9 male); 0 to 5 VDC, 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA for start/stop and autostart via contact closure (DB15 male); footswitch (three-pin DIN port). Monitor speed via analog output.

Specifikationer
Varenr. ISMISM932
Antal / pk 1
Enhed stk
Min. bestilling 1
Leverandørens varenummer 01094-46
UNSPSC 41105102
Type Udstyr
Design 2-stop | Benchtop | RS 232 | RS 232
Kanaler 12
Til slange/rør ID (mm) 0,13-3,17
Flow 44 ml/min
Vægt 5,8
Bemærkning DC motor
Antal ruller 8
Besk.godkendelse IP30
Betjeningspanel Digital
Flowområde 0,0015-44 ml/min
Power 30 W
Hast.område 0,4-45 rpm
Hast.indstilling Flowrate (?L/min eller mL/min), RPM eller relativ 0-100%,Flow (?L/min or mL/min), RPM or relative 0-100%
Hast.graduering 0,001
Slangemontering Click'n'go cassettes
CE-godkendt ja